熱門搜索: OCP  CISP  cisp  華為認證  華為認證

20年老牌IT培訓學校

全國咨詢電話028-86610558
當前位置:銀河教育 > 國際認證 > 思科認證 > CCNP > CCNP思科認證網絡高級工程師
  • CCNP思科認證網絡高級工程師

CCNP思科認證網絡高級工程師 CCNP

考試費用:請咨詢考務部

培訓費用:銀河教育不定期推出優惠活動,培訓費最低低至0元 授課方式:面授、直播課程、視頻課程、企業定制多種授課方式
咨詢電話:028-86610558
課程介紹
認證概述

路由和交換認證幫助甄別網絡工程師對本地局域網及廣域網的設計,實施,驗證,故障排 除及與其他網絡專家合作關于先進的網絡安全、語音、無線及視頻解決方案時必備的能力。對于那些 至少有一年網絡工作經驗,并準備提升復雜網絡解決方案相關技能和獨立工作能力的人來說,CCNP路 由和交換認證十分合適。

獲得CCNP路由和交換認證的考生,證明了他們具備網絡工程師,網絡支持工程師,系統工 程師或網絡技術員等企業職位所需的技能。此認證中的路由和交換協議知識將為您提供一個持久的適 應于當今物理網絡和未來虛擬化網絡的知識基礎。

考試項目:實施Cisco IP 路由(300-101)

考試說明:實施Cisco IP 路由(ROUTE 300-101)是獲得思科CCNP和CCDP認證需要通過的一項考試??荚?時間為120分鐘,包括50-60道考題。ROUTE 300-101考試證明通過的考生具備網絡路由的知識和相關技 能。他們有能力使用先進的IP尋址技術和路由技術實施可擴展的、高安全性的思科路由與局域網,廣 域網及IPv6的連接。 
本考試還涵蓋了為支持企業分支辦公網絡和移動網絡工作環境配置高安全性路由解決方案。
以下是實施Cisco IP 路由(ROUTE 300-101)考試的主要內容和考點。然而,在考試的特定版本中也可 能出現其他相關的考點。為了更好地反映考試內容并明確考試目的,下面的考試大綱可能在不發出通 知的情況下隨時調整。

章節目錄 課程目錄
第一章

Network Principles

  • 1.1  Identify Cisco Express Forwarding concepts
  • 1.1.a FIB
  • 1.1.b Adjacency table

  • 1.2   Explain general network challenges
  • 1.2.a Unicast
  • 1.2.b Out-of-order packets
  • 1.2.c Asymmetric routing

  • 1.3  Describe IP operations
  • 1.3.a ICMP Unreachable and Redirects
  • 1.3.b IPv4 and IPv6 fragmentation
  • 1.3.c TTL

  • 1.4   Explain TCP operations
  • 1.4.a IPv4 and IPv6 (P)MTU
  • 1.4.b MSS
  • 1.4.c Latency
  • 1.4.d Windowing
  • 1.4.e Bandwidth-delay product
  • 1.4.f Global synchronization

  • 1.5   Describe UDP operations
  • 1.5.a Starvation
  • 1.5.b Latency

  • 1.6   Recognize proposed changes to the network
  • 1.6.a Changes to routing protocol parameters
  • 1.6.b Migrate parts of the network to IPv6
  • 1.6.c Routing protocol migration
第二章

Layer 2 Technologies

  • 2.1   Configure and verify PPP
  • 2.1.a Authentication (PAP, CHAP)
  • 2.1.b PPPoE (client side only)
  • 2.2   Explain Frame Relay
  • 2.2.a Operations
  • 2.2.bPoint-to-point
  • 2.2.c Multipoint
第三章

Layer 3 Technologies

  • 3.1    Identify, configure, and verify IPv4 addressing and subnetting
  • 3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
  • 3.1.b ARP
  • 3.1.c DHCP relay and server
  • 3.1.d DHCP protocol operations
  • 1.2.b Out-of-order packets
  • 1.2.c Asymmetric routing

  • 3.2   Identify IPv6 addressing and subnetting
  • 3.2.a Unicast
  • 3.2.b EUI-64
  • 3.2.c ND, RS/RA
  • 3.2.d Autoconfig (SLAAC)
  • 3.2.e DHCP relay and server
  • 3.2.f DHCP protocol operations

  • 3.3   Configure and verify static routingM

  • 3.4   Configure and verify default routing

  • 3.5   Evaluate routing protocol types
  • 3.5.a Distance vector
  • 3.5.b Link state
  • 3.5.c Path vector

  • 3.6   Describe administrative distance

  • 3.7   Troubleshoot passive interfaces

  • 3.8   Configure and verify VRF lite

  • 3.9   Configure and verify filtering with any protocol

  • 3.10   Configure and verify redistribution between any routing protocols or routing sources
  • 3.11   Configure and verify manual and autosummarization with any routing protocol

  • 3.12   Configure and verify policy-based routing

  • 3.13   Identify suboptimal routing

  • 3.14   Explain ROUTE maps

  • 3.15   Configure and verify loop prevention mechanisms
  • 3.15.a Route tagging and filtering
  • 3.15.b Split-horizon
  • 3.15.c Route poisoning

  • 3.16   Configure and verify RIPv2

  • 3.17   Describe RIPng

  • 3.18   Describe EIGRP packet types

  • 3.19   Configure and verify EIGRP neighbor relationship and authentication

  • 3.20   Configure and verify EIGRP stubs

  • 3.21   Configure and verify EIGRP load balancing
  • 3.21.a Equal cost
  • 3.21.b Unequal cost
  • 3.22 Describe and optimize EIGRP metrics

  • 3.23   Configure and verify EIGRP for IPv6

  • 3.24   Describe OSPF packet types

  • 3.25   Configure and verify OSPF neighbor relationship and authentication



  •  
  •  
  • 3.26   Configure and verify network types, area types, and router types
  • 3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
  • 3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
  • 3.26.c Internal router, backbone router, ABR, ASBR
  • 3.26.d Virtual link

  • 3.27   Configure and verify OSPF path preference

  • 3.28   Configure and verify OSPF operations

  • 3.29   Configure and verify OSPF for IPv6

  • 3.30   Describe, configure, and verify BGP peer relationships and authentication
  • 3.30.a Peer group
  • 3.30.b Active, passive
  • 3.30.c States and timers

  • 3.31   Configure and verify eBGP (IPv4 and IPv6 address families)

  • 3.31.a eBGP
  • 3.31.b 4-byte AS number
  • 3.31.c Private AS

  • 3.32   Explain BGP attributes and best-path selection
第四章

VPN Technologies

  • 4.1   Configure and verify GRE
  • 4.2   Describe DMVPN (single hub)
  • 4.3   Describe Easy Virtual Networking (EVN)
第五章

Infrastructure Security

  • 5.1   Describe IOS AAA using local database

  • 5.2   Describe device security using IOS AAA with TACACS+ and RADIUS
  • 5.2.a AAA with TACACS+ and RADIUS
  • 5.2.b Local privilege authorization fallback

  • 5.3   Configure and verify device access control
  • 5.3.a Lines (VTY, AUX, console)
  • 5.3.b Management plane protection
  • 5.3.c Password encryption

  • 5.4   Configure and verify router security features
  • 5.4.a IPv4 access control lists (standard, extended, time- based)
  • 5.4.b IPv6 traffic filter
  • 5.4.c Unicast reverse path forwarding
第六章

Infrastructure Services

  • 6.1   Configure and verify device management
  • 6.1.a Console and VTY
  • 6.1.b Telnet, HTTP, HTTPS, SSH, SCP
  • 6.1.c (T)FTP

  • 6.2   Configure and verify SNMP
  • 6.2.a v2
  • 6.2.b v3

  • 6.3   Configure and verify logging
  • 6.3.a Local logging, syslog, debugs, conditional debugs
  • 6.3.b Timestamps

  • 6.4   Configure and verify Network Time Protocol (NTP)
  • 6.4.a NTP master, client, version 3, version 4
  • 6.4.b NTP authentication

  • 6.5   Configure and verify IPv4 and IPv6 DHCP
  • 6.5.a DHCP client, IOS DHCP server, DHCP relay
  • 6.5.b DHCP options (describe)

  • 6.6   Configure and verify IPv4 Network Address Translation (NAT)
  • 6.6.a Static NAT, dynamic NAT, PAT

  • 6.7   Describe IPv6 NAT
  • 6.7.a NAT64
  • 6.7.b NPTv6

  • 6.8   Describe SLA architecture
  • 6.9   Configure and verify IP SLA
  • 6.9.a ICMP

  • 6.10   Configure and verify tracking objects
  • 6.10.a Tracking objects
  • 6.10.b Tracking different entities (for example, interfaces, IPSLA results)

  • 6.11    Configure and verify Cisco NetFlow
  • 6.11.a NetFlow v5, v9
  • 6.11.b Local retrieval
  • 6.11.c Export (configuration only)
考試項目:實施Cisco IP交換網絡 (SWITCH 300-115)

考試說明:實施Cisco IP交換網絡(SWITCH 300-115) 獲得思科CCNP和CCDP認證需要通過的一項考試???試時間為120分鐘,包括45-55道考題。SWITCH 300-115考試證明通過的考生具備網絡交換的知識和技 能。他們有能力使用思科企業架構來設計、配置和驗證企業網絡交換解決方案的實施。 SWITCH考試還涵蓋了高度安全集成的VLAN和WLANs技術。 以下是實施Cisco IP交換網絡(SWITCH 300-115)考試的的主要內容和考點。然而,在考試的特定版本 中也可能出現其他相關的考點。為了更好地反映考試內容并明確考試目的,下面的考試大綱可能在不 發出通知的情況下隨時調整。

章節目錄 課程目錄
第一章

Layer 2 Technologies

  • 1.1   Configure and verify switch administration
  • 1.1.a SDM templates
  • 1.1.b Managing MAC address table
  • 1.1.c Troubleshoot Err-disable recovery

  • 1.2   Configure and verify Layer 2 protocols
  • 1.2.a CDP, LLDP
  • 1.2.b UDLD

  • 1.3   Configure and verify VLANs
  • 1.3.a Access ports
  • 1.3.b VLAN database
  • 1.3.c Normal, extended VLAN, voice VLAN
  • 1.4   Configure and verify trunking
  • 1.4.a VTPv1, VTPv2, VTPv3, VTP pruning
  • 1.4.b dot1Q
  • 1.4.c Native VLAN
  • 1.4.d Manual pruning

  • 1.5   Configure and verify EtherChannels
  • 1.5.a LACP, PAgP, manual
  • 1.5.b Layer 2, Layer 3
  • 1.5.c Load balancing
  • 1.5.d EtherChannel misconfiguration guard

  • 1.6   Configure and verify spanning tree
  • 1.6.a PVST+, RPVST+, MST
  • 1.6.b Switch priority, port priority, path cost, STP timers
  • 1.6.c PortFast, BPDUguard, BPDUfilter
  • 1.6.d Loopguard and Rootguard

  • 1.7   Configure and verify other LAN switching technologies
  • 1.7.a SPAN, RSPAN

  • 1.8   Describe chassis virtualization and aggregation technologies
  • 1.8.a Stackwise
第二章

Infrastructure Security

  • 2.1   Configure and verify switch security features
  • 2.1.a DHCP snooping
  • 2.1.b IP Source Guard
  • 2.1.c Dynamic ARP inspection
  • 2.1.d Port security
  • 2.1.e Private VLAN
  • 2.1.f Storm control

  • 2.2   Describe device security using Cisco IOS AAA with TACACS+ and RADIUS
  • 2.2.a AAA with TACACS+ and RADIUS
  • 2.2.b Local privilege authorization fallback
第三章

Infrastructure Services

  • 3.1   Configure and verify first-hop redundancy protocols
  • 3.1.a HSRP
  • 3.1.b VRRP
  • 3.1.c GLBP
考試項目:故障排除并維護Cisco IP網絡(300-135 )

考試說明:TSHOOT 300-135考試證明通過的考生具備這些知識和技能:設計和實施適用于復合型企業路 由交換網絡的定期維護;使用基于技術性實踐和系統性的ITIL兼容方式來進行網絡故障排除。
準備參加考試的考生必須注意:雖然此考試的官方先決條件是獲得CCNA路由交換認證,您還需要掌握 路由(300-101)和交換(300-115)考試中涵蓋的知識和考點以便通過考試。
以下是故障排除并維護Cisco IP網絡v2(300-135)考試的的主要內容和考點。然而,在考試的特定版本 中也可能出現其他相關的考點為了更好地反映考試內容并明確考試目的,下面的考試大綱可能在不發 出通知的情況下隨時調整。

章節目錄 課程目錄
第一章

Network Principles

  • 1.1   Use Cisco IOS troubleshooting tools
  • 1.1.a Debug, conditional debug
  • 1.1.b Ping and trace route with extended options

  • 1.2   Apply troubleshooting methodologies
  • 1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
  • 1.2.b Design and implement valid solutions
  • 1.2.c Verify and monitor resolution
第二章

Technologies

  • 2.1   Troubleshoot switch administration
  • 2.1.a SDM templates
  • 2.1.b Managing MAC address table
  • 2.1.c Troubleshoot Err-disable recovery

  • 2.2   Troubleshoot Layer 2 protocols
  • 2.2.a CDP, LLDP
  • 2.2.b UDLD

  • 2.3   Troubleshoot VLANs
  • 2.3.a Access ports
  • 2.3.b VLAN database
  • 2.3.c Normal, extended VLAN, voice VLAN

  • 2.4   Troubleshoot trunking
  • 2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
  • 2.4.b dot1Q
  • 2.4.c Native VLAN
  • 2.4.d Manual pruning

  • 2.5   Troubleshoot EtherChannels
  • 2.5.a LACP, PAgP, manual
  • 2.5.b Layer 2, Layer 3
  • 2.5.c Load balancing
  • 2.5.d EtherChannel misconfiguration guard
  • 2.6   Troubleshoot spanning tree
  • 2.6.a PVST+, RPVST +, MST
  • 2.6.b Switch priority, port priority, path cost, STP timers
  • 2.6.c PortFast, BPDUguard, BPDUfilter
  • 2.6.d Loopguard, Rootguard

  • 2.7   Troubleshoot other LAN switching technologies
  • 2.7.a SPAN, RSPAN

  • 2.8   Troubleshoot chassis virtualization and aggregation technologies
  • 2.8.a Stackwise
第三章

Layer 3 Technologies

  • 3.1   Troubleshoot IPv4 addressing and subnetting
  • 3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
  • 3.1.b ARP
  • 3.1.c DHCP relay and server
  • 3.1.d DHCP protocol operations

  • 3.2   Troubleshoot IPv6 addressing and subnetting
  • 3.2.a Unicast
  • 3.2.b EUI-64
  • 3.2.c ND, RS/RA
  • 3.2.d Autoconfig (SLAAC)
  • 3.2.e DHCP relay and server
  • 3.2.f DHCP protocol operations

  • 3.3  Troubleshoot static routing

  • 3.4   Troubleshoot default routing

  • 3.5   Troubleshoot administrative distance

  • 3.6   Troubleshoot passive interfaces

  • 3.7   Troubleshoot VRF lite

  • 3.8   Troubleshoot filtering with any protocol

  • 3.9   Troubleshoot between any routing protocols or routing sources

  • 3.10   Troubleshoot manual and autosummarization with any routing protocol
  • 3.11   Troubleshoot policy-based routing

  • 3.12   Troubleshoot suboptimal routing

  • 3.13   Troubleshoot loop prevention mechanisms
  • 3.13.a Route tagging, filtering
  • 3.13.b Split-horizon
  • 3.13.c Route poisoning

  • 3.14   Troubleshoot RIPv2

  • 3.15   Troubleshoot EIGRP neighbor relationship and authentication

  • 3.16   Troubleshoot loop free path selection
  • 3.16.a RD, FD, FC, successor, feasible successor

  • 3.17   Troubleshoot EIGPR operations
  • 3.17.a Stuck in active

  • 3.18   Troubleshoot EIGRP stubs

  • 3.19   Troubleshoot EIGRP load balancing
  • 3.19.a Equal cost
  • 3.19.b Unequal cost

  • 3.20   Troubleshoot EIGRP metrics

  • 3.21   Troubleshoot EIGRP for IPv6



  •  
  •  
  • 3.22   Troubleshoot OSPF neighbor relationship and authentication

  • 3.23   Troubleshoot network types, area types, and router types
  • 3.23.a Point-to-point, multipoint, broadcast, nonbroadcast
  • 3.23.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
  • 3.23.c Internal router, backbone router, ABR, ASBR
  • 3.23.d Virtual link

  • 3.24   Troubleshoot OSPF path preference

  • 3.25   Troubleshoot OSPF operations

  • 3.26   Troubleshoot OSPF for IPv6

  • 3.27   Troubleshoot BGP peer relationships and authentication
  • 3.27.a Peer group
  • 3.27.b Active, passive
  • 3.27.c States and timers

  • 3.28   Troubleshoot eBGP
  • 3.28.a eBGP
  • 3.28.b 4-byte AS number
  • 3.28.c Private AS
第四章

VPN Technologies

  • 4.1   Troubleshoot GRE
第五章

Infrastructure Security

  • 5.1   Troubleshoot IOS AAA using local database

  • 5.2   Troubleshoot device access control
  • 5.2.a Lines (VTY, AUX, console)
  • 5.2.b Management plane protection
  • 5.2.c Password encryption

  • 5.3   Troubleshoot router security features
  • 5.3.a IPv4 access control lists (standard, extended, time-based)
  • 5.3.b IPv6 traffic filter
  • 5.3.c Unicast reverse path forwarding
第六章

Infrastructure Services

  • 6.1   Troubleshoot device management
  • 6.1.a Console and VTY
  • 6.1.b Telnet, HTTP, HTTPS, SSH, SCP
  • 6.1.c (T) FTP

  • 6.2   Troubleshoot SNMP
  • 6.2.a v2
  • 6.2.b v3

  • 6.3   Troubleshoot logging
  • 6.3.a Local logging, syslog, debugs, conditional debugs
  • 6.3.b Timestamps



  •  
  •  
  • 6.4   Troubleshoot Network Time Protocol(NTP)
  • 6.4.a NTP master, client, version 3, version 4
  • 6.4.b NTP authentication

  • 6.5   Troubleshoot IPv4 and IPv6 DHCP
  • 6.5.a DHCP client, IOS DHCP server, DHCP relay
  • 6.5.b DHCP options (describe)

  • 6.6   Troubleshoot IPv4 Network Address Translation (NAT)



  •  
  •  
  • 6.6.a Static NAT, Dynamic NAT, PAT

  • 6.7   Troubleshoot SLA architecture

  • 6.8   Troubleshoot tracking objects
  • 6.8.a Tracking objects
  • 6.8.b Tracking different entities (for example, interfaces, IPSLA results)

在線報名
10秒快速登記報名
姓名:
聯系電話:
選擇課程:
咨詢熱線
028-86610558
在線報名
  • 姓  名
  • 電  話
  • 課  程
登記信息后,咨詢老師會第一時間與您聯系!

關注銀河教育公眾號
獲取最新優惠信息
相關課程
成年无码av片在线_成年片黄网站色大全视频免费_成年av免费免播放器